Grace Product Support Videos

Installing the encoders

Moving Screen to Rear Handles

How to reassemble the Qnique Quilter encoder

Reinstalling the bobbin case spring

Threading the Qnique 14+

Oiling the Qnique 14+

Changing the needle on the Qnique 14+

Tension 1 - bottom tension

Tension 2 - top tension too tight

Tension 3 - top tension too loose

Tension 4 - eyelashes or looping

Adjusting the hopping foot

Qnique Stitch Modes

Qnique Bobbin Winder

Installing bobbin

Install Encoders with Single-Wheel Tracks

Changing the Bobbin on Q'nique 19

Threading the Q'nique 19

Changing the needle on the Qnique 19

Timing the Q'nique 19

Timing the Q'nique 15 or 21

Loading fabric on the SR-2 frame

Loading Fabric on a Metal Machine Quilting Frame

Loading Fabric on a wooden Grace Frame

Loading Fabric on Grace Hand Frame (Z44 or EZ3)

Attaching fabric to the Q-Zone Hoop-Frame

Loading Fabric on the Continuum Frame

Loading Fabric onto the Cutie Tabletop Fabric frame

How to assemble the Gracie King or Queen Frame

How to assemble the Majestic Quilting Frame

Q-Zone Hoop-Frame Assembly

Continuum Frame Assembly

Cutie Tabletop Fabric Frame Assembly Instructions

Installing SureStitch on dual-tack quilting frame

Installing SureStitch on a singe-track frame

How to use the SureStitch Stitch Regulator

Changing the blade on the My Comfort Cutter

Making the My Comfort Cutter left or right handed

Changing the MyComfort Cutter handle inserts

How to use the TrueSharp 2 Rotary Blade Shapener

How to use the Linear (Manual) Shapener with 45mm blades

How to use the Linear (Manual) Shapener with 60mm blades

QCT- Updating the firmware for the motor-plate